Maven plugin for GraalVM Native Image building

Introduction

The Maven plugin for GraalVM Native Image building adds support for building and testing native images using Apache Maven™.

Quickstart

This plugin first requires that you setup GraalVM and native-image properly. It will then make use of Maven profiles to enable building and testing of native images.

Configuration

Registering the plugin

Add the following profile to your pom.xml file:

  <profiles>
    <profile>
      <id>native</id>
      <build>
        <plugins>
          <plugin>
            <groupId>org.graalvm.buildtools</groupId>
            <artifactId>native-maven-plugin</artifactId>
            <version>${native.maven.plugin.version}</version>
            <executions>
              <execution>
                <id>build-native</id>
                <goals>
                  <goal>build</goal>
                </goals>
                <phase>package</phase>
              </execution>
              <execution>
                <id>test-native</id>
                <goals>
                  <goal>test</goal>
                </goals>
                <phase>test</phase>
              </execution>
            </executions>
            <configuration>
              <!-- ... -->
            </configuration>
          </plugin>
        </plugins>
      </build>
    </profile>
  </profiles>

You can then build a native executable directly with Maven using the mvn -Pnative -DskipTests package command without running the native-image command as a separate step.

The plugin figures out which JAR files it needs to pass to the native image and what the executable main class should be. If the heuristics fails with the no main manifest attribute, in target/<name>.jar error, the main class should be specified in the <configuration> node of the plugin. When mvn -Pnative package completes, an executable is ready for use, generated in the target directory of the project.

Tip

Testing pre-releases

You can use the development versions of the plugin by adding our snapshot repository. Pre-releases are provided for convenience, without any guarantee.

<pluginRepositories>
    <pluginRepository>
        <id>graalvm-native-build-tools-snapshots</id>
        <name>GraalVM native-build-tools Snapshots</name>
        <url>https://raw.githubusercontent.com/graalvm/native-build-tools/snapshots</url>
        <releases>
            <enabled>false</enabled>
        </releases>
        <snapshots>
            <enabled>true</enabled>
        </snapshots>
    </pluginRepository>
</pluginRepositories>

Configuration options

If you use Native Image Maven plugin, it will pick up all the configuration for your application stored below the META-INF/native-image/ resource location, as described in Native Image Build Configuration. It is also possible to customize the plugin within a <configuration> node. The following configurations are available.

Configuration parameter <mainClass>: if the execution fails with the no main manifest attribute, in target/<name>.jar error, the main class should be specified. By default the plugin consults several locations in the pom.xml file in the following order to determine what the main class of the image should be:
- <maven-shade-plugin> <transformers> <transformer> <mainClass>
- <maven-assembly-plugin> <archive> <manifest> <mainClass>
- <maven-jar-plugin> <archive> <manifest> <mainClass>
Configuration parameter <imageName>: if an image filename is not set explicitly, use parameter <imageName> to provide a custom filename for the image.
Configuration parameter <buildArgs>: if you want to pass additional options for to the native image builder, use the <buildArgs> parameter in the definition of the plugin. For example, to build a native image with assertions enabled that uses com.test.classname as a main class, add:

<configuration>
  <imageName>executable-name</imageName>
  <mainClass>com.test.classname</mainClass>
  <buildArgs>
    <buildArg>--no-fallback</buildArg>
  </buildArgs>
  <skip>false</skip>
</configuration>

If you use GraalVM Enterprise as the JAVA_HOME environment, the plugin builds a native image with Enterprise features enabled, e.g., an executable will automatically be built with compressed references and other optimizations enabled.

Reusing configuration from a parent POM

The <buildArgs> element can be combined between parent and children POM. Suppose the following parent POM definition:

<plugin>
  <groupId>org.graalvm.buildtools</groupId>
  <artifactId>native-maven-plugin</artifactId>
  <version>${current_plugin_version}</version>
  <configuration>
    <imageName>${project.artifactId}</imageName>
    <mainClass>${exec.mainClass}</mainClass>
    <buildArgs>
      <buildArg>--no-fallback<buildArg>
    </buildArgs>
  </configuration>
</plugin>

Children projects have the ability to append <buildArg> arguments in the following way:

<plugin>
  <groupId>org.graalvm.buildtools</groupId>
  <artifactId>native-maven-plugin</artifactId>
  <configuration>
    <buildArgs combine.children="append">
      <buildArg>--verbose</buildArg>
    </buildArgs>
  </configuration>
</plugin>

In this case, the arguments that will be passed to the native-image executable will be:

--no-fallback --verbose

JUnit Testing support

In order to use the recommended test listener mode, you need to add following dependency:

<dependencies>
   <!-- ... -->
   <dependency>
    <groupId>org.graalvm.buildtools</groupId>
    <artifactId>junit-platform-native</artifactId>
    <version>${current-junit-platform-native-version}</version>
    <scope>test</scope>
  </dependency>
</dependencies>

This step won’t be needed as of JUnit 5.8 with a future release of native-maven-plugin (see the related issue for more information).

Running mvn -Pnative -Dskip test will then build and run native tests.

Long classpath and shading support

Under Windows, it is possible that the length of the classpath exceeds what the operating system supports when invoking the CLI to build a native image.

If this happens, one option is to use a shaded jar and use it instead of individual jars on classpath.

First, you’ll need to setup the Maven Shade plugin:

<plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-shade-plugin</artifactId>
    <version>3.2.4</version>
    <executions>
        <execution>
            <phase>package</phase>
            <goals>
                <goal>shade</goal>
            </goals>
            <configuration>
                <shadedArtifactAttached>true</shadedArtifactAttached>
            </configuration>
        </execution>
    </executions>
</plugin>

Then the native plugin needs to be configured to use this jar instead of the full classpath:

<plugin>
    <groupId>org.graalvm.buildtools</groupId>
    <artifactId>native-maven-plugin</artifactId>
    <version>${native.maven.plugin.version}</version>
    <executions>
        <execution>
            <id>build-native</id>
            <goals>
                <goal>build</goal>
            </goals>
            <phase>package</phase>
        </execution>
    </executions>
    <configuration>
        <skip>false</skip>
        <imageName>${imageName}</imageName>
        <buildArgs>
            <buildArg>--no-fallback</buildArg>
        </buildArgs>
        <classpath>
            <param>${project.build.directory}/${project.artifactId}-${project.version}-shaded.jar</param>
        </classpath>
    </configuration>
</plugin>

Depending on the other plugins your build uses (typically the Spring Boot plugin), you might have to configure, in addition, the main class:

<plugin>
    <groupId>org.graalvm.buildtools</groupId>
	<artifactId>native-maven-plugin</artifactId>
	<version>${native.buildtools.version}</version>
	<configuration>
		<imageName>${project.artifactId}</imageName>
		<mainClass>${exec.mainClass}</mainClass>
		<buildArgs>
			<buildArg>--no-fallback</buildArg>
		</buildArgs>
		<classpath>
			<param>
				${project.build.directory}/${project.artifactId}-${project.version}-shaded.jar
			</param>
		</classpath>
...

To be able to execute tests in native mode, you will need more setup:

Create a src/assembly/test-jar-with-dependencies.xml file with the following contents:

<assembly xmlns="http://maven.apache.org/plugins/maven-assembly-plugin/assembly/1.1.2"
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:schemaLocation="http://maven.apache.org/plugins/maven-assembly-plugin/assembly/1.1.2 http://maven.apache.org/xsd/assembly-1.1.2.xsd">
    <id>tests</id>
    <formats>
        <format>jar</format>
    </formats>
    <fileSets>
        <fileSet>
            <directory>${project.build.directory}/test-classes</directory>
            <outputDirectory>/</outputDirectory>
        </fileSet>
        <fileSet>
            <directory>${project.build.outputDirectory}</directory>
            <outputDirectory>/</outputDirectory>
        </fileSet>
    </fileSets>
    <includeBaseDirectory>false</includeBaseDirectory>
    <dependencySets>
        <dependencySet>
            <outputDirectory>/</outputDirectory>
            <useProjectArtifact>true</useProjectArtifact>
            <unpack>true</unpack>
            <scope>test</scope>
        </dependencySet>
    </dependencySets>
</assembly>

Add the assembly plugin to your native profile:

<plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-assembly-plugin</artifactId>
    <version>2.4.1</version>
    <configuration>
        <descriptors>
            <descriptor>src/assembly/test-jar-with-dependencies.xml</descriptor>
        </descriptors>
    </configuration>
    <executions>
        <execution>
            <id>make-test-jar</id>
            <phase>package</phase>
            <goals>
                <goal>single</goal>
            </goals>
        </execution>
    </executions>
</plugin>

Due to a limitation in Maven, you will need to move the tests execution to the "integration-test" phase:

<plugin>
    <groupId>org.graalvm.buildtools</groupId>
    <artifactId>native-maven-plugin</artifactId>
    <version>${native.maven.plugin.version}</version>
    <executions>
        <execution>
            <id>test-native</id>
            <goals>
                <goal>test</goal>
            </goals>
            <phase>integration-test</phase>
            <configuration>
                <classpath>
                    <param>${project.build.directory}/${project.artifactId}-${project.version}-tests.jar</param>
                </classpath>
            </configuration>
        </execution>
        <execution>
            <id>build-native</id>
            <goals>
                <goal>build</goal>
            </goals>
            <phase>package</phase>
            <configuration>
                <classpath>
                    <param>${project.build.directory}/${project.artifactId}-${project.version}-shaded.jar</param>
                </classpath>
            </configuration>
        </execution>
    </executions>
    <configuration>
        <skip>false</skip>
        <imageName>${imageName}</imageName>
        <buildArgs>
            <buildArg>--no-fallback</buildArg>
        </buildArgs>
    </configuration>
</plugin>

Finally, you will need to execute tests using the integration-test phase instead of test:

./mvn -Pnative integration-test

Please refer to the Maven Shade plugin documentation for more details on how to configure shading and the Maven Assembly plugin documentation to tweak what to include in tests.

Javadocs

In addition, you can consult the Javadocs of the plugin.